Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sesiuni:virtualization-networking:session6 [2013/06/26 05:09]
freescale [Traffic control]
sesiuni:virtualization-networking:session6 [2013/06/26 08:08]
freescale [Setup]
Line 1: Line 1:
 = Topology = = Topology =
 {{ :​sesiuni:​virtualization-networking:​netperf_setup.png |}} {{ :​sesiuni:​virtualization-networking:​netperf_setup.png |}}
 +
 += Slides =
 +{{:​sesiuni:​virtualization-networking:​session6_network_benchmarking_.pdf|}}
  
 = Setup = = Setup =
Line 6: Line 9:
 Download the archive and unpack it Download the archive and unpack it
 <​code>​ <​code>​
-wget http:///​session6.zip+wget http://172.16.5.218/​session6.zip
 unzip session6.zip unzip session6.zip
 </​code>​ </​code>​
Line 54: Line 57:
 netperf -H 192.168.0.2 -t TCP_MAERTS -cC netperf -H 192.168.0.2 -t TCP_MAERTS -cC
 </​code>​ </​code>​
 +Find out more about **netperf** at [[http://​www.netperf.org/​netperf/​training/​Netperf.html]]
 == Speedtest.net == == Speedtest.net ==
 Measure bandwidth and delay on links towards California and Spain Measure bandwidth and delay on links towards California and Spain
Line 100: Line 103:
 ip link sh dev br0 ip link sh dev br0
 </​code>​ </​code>​
 +
 +Display the offloading capabilities of the NICs
 +<​code>​
 +ethtool -k br0
 +</​code>​
 +<​code>​
 +ethtool -k eth0
 +</​code>​
 +
 == UDP == == UDP ==
 Measure the UDP bandwidth using the default send size (MTU). Display the UDP statistics before and after running the test for the host interface. Measure the UDP bandwidth using the default send size (MTU). Display the UDP statistics before and after running the test for the host interface.
sesiuni/virtualization-networking/session6.txt · Last modified: 2013/06/26 08:08 by freescale